The perfect kit to start your adventure with stripping, sanding and polishing on smaller or medium sized projects. The set is perfect for stripping, grinding, polishing and honing of concrete floors. Machines are small and light, so they can be transported even in a passenger car.

Lavina 16EU works well on glue removal, concrete floors preparation and bush-hammering, grinding and polishing.
Lavina 16EU can be quickly disassembled so you can easily put it in the car or take it upstairs.

Combined with the LAVINA V20 dust extractor, the machine will be ideal for working on projects of up to 300m2.
Any LAVINA tool for grinding, polishing, bush-hammering and floor preparation can be attached to the machine. 

The machine has three 7” (180mm) heads, each with 3 QuickChange adapters, which allows efficient operation using 9 Superabrasive tools at the same time.

Industrial vacuum Delfin MTL 501 WD can be used for dry and wet works. Delfin MTL501 WD is a compact and easy-to-operate vacuum, perfect for sucking liquids and solids.
Delfin MTL 501WD is powered by a high-power single-phase motor and is equipped with dust and liquid double filtration system, which makes it a perfect tool in keeping working environment clean. Fitted with HEPA filter in standard.
A 50 L container, made fully of painted steel, allows for safe collection of large amounts of liquids mixed with dust. A handy drain hose provides for quick and easy draining of the sucked liquid. Also available with compressed air supply.
Vacuum dedicated for collecting concrete dust produced in small projects after grinding and polishing concrete and stone.